MEGARAID EXPRESS PLUS Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller card
Maximum Onboard Memory	128MB DRAM
Boot ROM	Available
Hard Drives supported	Up to 15 SCSI devices
Floppy drives supported	None
Data Bus	32-bit PCI
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
68-pin SCSI wide connector - internal	J2	4-pin connector - drive active LED	J5
IC connector	J3	68-pin SCSI 2 wide connector - external	J6
9-pin serial port - internal	J4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J8	Pins 1 & 2 closed
»	Factory configured - do not alter	J9	Pins 1 & 2 closed
»	Factory configured - do not alter	J10	Pins 1 & 2 closed
»	Factory configured - do not alter	J11	Open
»	Factory configured - do not alter	J12	Open

SCSI TERMINATION SELECTION
Setting	J1
Software control of SCSI termination via drive detection	Pins 1 & 2 closed
Permanently disable all onboard SCSI termination	Pins 2 & 3 closed
Permanently enable all onboard SCSI termination	Open

DRAM CONFIGURATION
Size	Bank 0
4MB	(1) 1MB x 36
8MB	(1) 2MB x 36
16MB	(1) 4MB x 36
32MB	(1) 8MB x 36
64MB	(1) 16MB x 36
128MB	(1) 32MB x 36