CDPC-AT INTERFACE CARD (650-0024-05) IO card Settings and Configuration
MEDIA VISION TECHNOLOGY, INC.
CDPC-AT INTERFACE CARD (650-0024-05)
Card Type | CR-ROM Interface card |
Chip Set | Unidentified |
Maximum Onboard Memory | Unidentified |
I/O Options | Interface connector |
Data Bus | 16-bit ISA |
CONNECTIONS | |
Function | Label |
Interface connector | CN1 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | DMA sharing - disabled | J11 | Pins 2 & 3 closed |
DMA sharing - enabled | J11 | Pins 1 & 2 closed | |
PORT ADDRESS SELECTION | ||||
Setting | J10/A | J10/B | J10/C | |
| » | 220 | Open | Open | Closed |
230 | Open | Closed | Open | |
240 | Closed | Open | Open | |
BOARD ID SELECTION |
Note: Closing J2/pins 5 & 6 forces the board base I/O address to 388h. When using the other jumper settings, the software scans for an available base I/O address. Refer to the manufacturer’s documentation for possible ID and base I/O settings. |
INTERRUPT SELECTION | |||||
Setting | J13/A | J13/B | J13/C | J13/D | |
IRQ2 | Open | Open | Open | Closed | |
IRQ3 | Open | Open | Closed | Open | |
| » | IRQ5 | Open | Closed | Open | Open |
IRQ7 | Closed | Open | Open | Open | |
MISCELLANEOUS TECHNICAL NOTES |
Note: Termination Power and termination settings are unidentified. |
My Books
