LAB-PC+ IO card Settings and Configuration

Card Type	Analog to digital timing converter
Chipset Controller	ACT A1010A
I/O Options	Analog input, digital input, digital output
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location
50-pin I/O interface connector	J1

DMA CHANNEL SELECTION
DMA		W6/A	W6/B	W6/C	W6/D	W6/E	W6/F	W6/G	W6/H
»	3	Open	Open	Open	Open	Open	Open	Closed	Closed
	1	Open	Open	Closed	Closed	Open	Open	Open	Open
	2	Open	Open	Open	Open	Closed	Closed	Open	Open
	Disabled	Closed	Closed	Open	Open	Open	Open	Open	Open

BASE I/O ADDRESS SELECTION
Address		U1/A5	U1/A6	U1/A7	U1/A8	U1/A9
»	260h	Off	Off	On	On	Off
	000h	On	On	On	On	On
	020h	Off	On	On	On	On
	040h	On	Off	On	On	On
	060h	Off	Off	On	On	On
	080h	On	On	Off	On	On
	360h	Off	Off	On	Off	Off
	380h	On	On	Off	Off	Off
	3A0h	Off	On	Off	Off	Off
	3C0h	On	Off	Off	Off	Off
	3E0h	Off	Off	Off	Off	Off
Note: A total of 255 base address settings are available. The switches are a binary representation of the decimal memory addresses. Switch A9 is the Most Significant Bit and switch A5 is the Least Significant Bit. The switches have the following decimal values: switch A9=512, A8=256, A7=128, A6=64, A5=32. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0)

INTERRUPT SELECTION
IRQ		W5/A	W5/B	W5/C	W5/D	W5/E	W5/F
»	5	Open	Open	Closed	Open	Open	Open
	3	Closed	Open	Open	Open	Open	Open
	4	Open	Closed	Open	Open	Open	Open
	6	Open	Open	Open	Closed	Open	Open
	7	Open	Open	Open	Open	Closed	Open
	9	Open	Open	Open	Open	Open	Closed
	Disabled	Open	Open	Open	Open	Open	Open

ANALOG OUTPUT CONFIGURATION
Type		W1 (Channel 0)	W2 (Channel 1)
»	Bipolar output	Pins 1 & 2 closed	Pins 1 & 2 closed
	Unipolar output	Pins 2 & 3 closed	Pins 2 & 3 closed

ANALOG INPUT CONFIGURATION
Type		W4
»	RSE input	Pins 1 & 2 closed
	NRSE/DIFF input	Pins 2 & 3 closed

ANALOG INPUT POLARITY CONFIGURATION
Type		W3
»	Bipolar input	Pins 1 & 2 closed
	Unipolar input	Pins 2 & 3 closed