APTIVA 2162 Motherboard Settings and Configuration
IBM CORPORATION
APTIVA 2162
Processor | Pentium |
Processor Speed | 166/200MHz |
Chip Set | Unidentified |
Video Chip Set | Unidentified |
Maximum Onboard Memory | 64MB (EDO supported) |
Maximum Video Memory | 4MB |
Cache | 256/512KB |
BIOS | Unidentified |
Dimensions | 330mm x 218mm |
I/O Options | Floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial port, VESA feature connector, VGA port, riser slot, cache slot, VRM connector, USB connector, wake up on ring connector |
NPU Options | None |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Chassis fan power | J1 | VESA feature connector | J19 |
USB connector | J2 | VGA port | J21 |
VRM connector | J3 | Soft off power supply | J22 |
IDE interface 1 | J5 | Auxiliary 5v connector | J23 |
IDE interface 2 | J6 | Wake up on ring connector | J24 |
PS/2 mouse port | J7 | IDE interface LED | J25 |
Speaker power | J14 | Speaker | JP1 |
Serial port | J15 | Cache slot | SL1 |
Parallel port | J16 | Riser slot | SL2 |
Floppy drive interface | J17 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | J26 | Open |
Flash BIOS write protect disabled | JP4 | Pins 1 & 2 closed | |
Flash BIOS write protect enabled | JP4 | Pins 2 & 3 closed | |
Floppy drive write protect disabled | JP5 | Pins 1 & 2 closed | |
Floppy drive write protect enabled | JP5 | Pins 2 & 3 closed | |
» | CMOS memory normal operation | JP6 | Pins 1 & 2 closed |
CMOS memory clear | JP6 | Pins 2 & 3 closed | |
Home director/wake up on ring | JP12 | Pins 1 & 2 closed | |
Wake up on ring connect over serial port only | JP12 | Pins 2 & 3 closed | |
DIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (1) 1M x 64 | None |
16MB | (1) 2M x 64 | None |
16MB | (1) 1M x 64 | (1) 1M x 64 |
24MB | (1) 2M x 64 | (1) 1M x 64 |
32MB | (1) 4M x 64 | None |
32MB | (1) 2M x 64 | (1) 2M x 64 |
40MB | (1) 4M x 64 | (1) 1M x 64 |
48MB | (1) 4M x 64 | (1) 2M x 64 |
64MB | (1) 4M x 64 | (1) 4M x 64 |
CACHE CONFIGURATION | |
Size | SL1 |
256KB | 256KB module installed |
512KB | 512KB module installed |
VIDEO MEMORY CONFIGURATION | ||
Size | Bank 0 | JP9 |
2MB | 2MB | Not installed |
4MB | 2MB | 2MB module installed |
Note: Bank 0 is factory installed and is not configurable. The location is unidentified. | ||
CPU SPEED SELECTION | ||||
CPU speed | Clock speed | Multiplier | JP2 | JP3 |
166MHz | 66MHz | 2.5x | 1 & 3, 2 & 4 | 1 & 3, 2 & 4 |
200MHz | 66MHz | 3x | 1 & 3, 2 & 4 | 1 & 3, 3 & 5 |
Note: Pins designated should be in the closed position. | ||||
My Books
