VIPER 809 Motherboard Settings and Configuration

Device Type	Mainboard
Processor	80486DX/SGS486DX2V/AM486DX2SV/80486DX2/SGS486DX4V/ AM486DX4SV/80486DX4/AM X5
Processor Speed	25/33/50(internal)/66(internal)/75(internal)/100(internal)/133(internal)MHz
Chip Set	Unidentified
Video Chip Set	Unidentified
Maximum Onboard Memory	64MB
Maximum Video Memory	Unidentified
Cache	Unidentified
BIOS	Unidentified
Dimensions	Unidentified
I/O Options	Floppy drive interface, green PC connector, IDE interface, SCSI interface, parallel port, PS/2 mouse interface, serial ports (2), VGA feature connector, VGA port, flat panel connector, PC/104 connectors (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
External battery	B1	PS/2 mouse interface	J9
IDE interface	J1	SCSI interface LED	J10
Floppy drive interface	J2	Green PC connector	J11
Multi function connector	J3		J12
Serial port 2	J4	Power connector	J13
Serial port 1	J5	VGA port	J15
VGA feature connector	J6	Parallel port	J18
SCSI interface	J7	PC/104 connector (16-bit)	P1
Flat panel connector	J8	PC/104 connector (8-bit)	P2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	IOCHRDY signal to IDE interface disabled	W9	Open
	IOCHRDY signal to IDE interface enabled	W9	Closed
»	Flat panel voltage select 5v	W10	Pins 1 & 2 closed
	Flat panel voltage select 3.3v	W10	Pins 2 & 3 closed
»	VGA select ready	W11	Pins 1 & 2 closed
	VGA select local ready	W11	Pins 2 & 3 closed
»	Serial mode select normal	W23/pins 1 & 2	Open
	Serial mode select download	W23/pins 1 & 2	Closed
»	Standard mode enabled	W23/pins 3 & 4	Open
	VT100 mode enabled	W23/pins 3 & 4	Closed
»	Teknor extension enabled	W23/pins 5 & 6	Open
	Teknor extension disabled	W23/pins 5 & 6	Closed
»	On board video enabled	W23/pins 7 & 8	Open
	On board video disabled	W23/pins 7 & 8	Closed
»	BIOS boot select normal boot	W25	Open
	BIOS boot select emergency boot	W25	Closed
»	Watchdog timer enabled	W26	Closed
	Watchdog timer disabled	W26	Open
»	Power fail monitoring disabled	W27	Open
	Power fail monitoring enabled	W27	Closed
»	Battery type select internal	W28	Pins 1 & 2 closed
	Battery type select external	W28	Pins 2 & 3 closed
»	Power failure detection source external power fail (pin 6 on J13)	W29	Pins 1 & 2 closed
	Power failure detection source internal/external battery <3v	W29	Pins 2 & 3 closed

SIMM CONFIGURATION
Size	Bank 0	Bank 1
1MB	(1) 256K x 36	None
2MB	(1) 256K x 36	(1) 256K x 36
3MB	(1) 512K x 36	(1) 256K x 36
4MB	(1) 1M x 36	None
4MB	(1) 512K x 36	(1) 512K x 36
8MB	(1) 2M x 36	None
8MB	(1) 1M x 36	(1) 1M x 36
12MB	(1) 2M x 36	(1) 1M x 36
16MB	(1) 4M x 36	None
16MB	(1) 2M x 36	(1) 2M x 36
32MB	(1) 8M x 36	None
48MB	(1) 8M x 36	(1) 4M x 36
48MB	(1) 4M x 36	(1) 8M x 36
64MB	(1) 8M x 36	(1) 8M x 36

CACHE CONFIGURATION

Note: Cache is factory installed and is not configurable. The size is unidentified.

VIDEO MEMORY CONFIGURATION

Note: Video memory is factory installed and is not configurable. The size is unidentified.

CPU SPEED SELECTION
Speed	W3	W24
25MHz	Open	Pins 3 & 4 closed
33MHz	Open	Pins 1 & 2 closed
50iMHz	Open	Pins 3 & 4 closed
66iMHz	Open	Pins 1 & 2 closed
75iMHz	Open	Pins 3 & 4 closed
100iMHz	Open	Pins 1 & 2 closed
133iMHz	Open	Pins 1 & 2 closed

CPU TYPE SELECTION
Type	W16	W17	W18	W19
80486DX	Open	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
SGS486DX2V 2x (WB)	Closed	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
SGS486DX2V 2x (WT)	Closed	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
AM486DX2SV 2x (WB)	Closed	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
AM486DX2SV 2x (WT)	Closed	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
80486DX2	Open	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
SGS486DX4V 3x (WB)	Open	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
SGS486DX4V 3x (WT)	Open	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
AM486DX4SV 2x (WB)	Closed	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
AM486DX4SV 2x (WT)	Closed	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
AM486DX4SV 3x (WB)	Open	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
AM486DX4SV 3x (WT)	Open	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
80486DX4 2x (WB)	Closed	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
80486DX4 2x (WT)	Closed	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
80486DX4 3x (WB)	Open	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
80486DX4 3x (WT)	Open	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
AM X5-133 3x (WB)	Open	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
AM X5-133 3x (WT)	Open	Pins 1 & 2 closed	Open	Pins 1 & 2 closed
AM X5-133 4x (WB)	Closed	Pins 2 & 3 closed	Closed	Pins 2 & 3 closed
AM X5-133 4x (WT)	Closed	Pins 1 & 2 closed	Open	Pins 1 & 2 closed

CPU VOLTAGE SELECTION
Voltage	W1
3.3v	Pins 1 & 2 closed
5v	Pins 2 & 3 closed

SERIAL PORT 2 LOOPBACK SELECTION
Setting		W7	W8
»	Normal	Open	Open
	Loopback	Closed	Closed

SERIAL PORT 2 SELECTION
Setting		W6	W12	W13	W14	W15
»	RS-232	Open	1 & 2	1 & 2	1 & 2	1 & 2
	RS-485	Closed	2 & 3	2 & 3	2 & 3	2 & 3

FLOPPY DRIVE EDOUT SELECTION
Setting		W21
»	Left to software	Open
	Ground to pin 17 on J2	Pins 2 & 4 closed
	Ground to pin 29 on J2	Pins 3 & 4 closed
	EDOUT to pin 29 on J2	Pins 1 & 3 closed
	EDOUT to pin 17 on J2	Pins 1 & 2 closed

FLOPPY DRIVE HDOUT SELECTION
Setting		W20
»	Left to software	Open
	Ground to pin 27 on J2	Pins 2 & 4 closed
	Ground to pin 33 on J2	Pins 3 & 4 closed
	HDOUT to pin 33 on J2	Pins 1 & 3 closed
	HDOUT to pin 27 on J2	Pins 1 & 2 closed

BASE I/O SELECTION
Address		W22
»	190H	Pins 1 & 2, 3 & 4 closed
	290H	Pins 1 & 2 closed
	390H	Pins 3 & 4 closed
	390H	Open

FEATURE CONNECTOR SELECTION
Setting		W4	W5
»	Disabled	Closed	Open
	Enabled	Open	Closed
	V-port enabled	Open	Open

SCSI TERMINATION SELECTION
Setting		W2
»	Controlled by hardware	Pins 1 & 2 closed
	Controlled by software	Pins 2 & 3 closed
	Disabled by hardware	Open