ETHERDUO PCMCIA Network Card Settings and Configuration
ACCTON TCHNOLOGY CORPORATION
ETHERDUO PCMCIA
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | 16KB |
Boot ROM | Unidentified |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
Data Bus | PCMCIA |
CONNECTIONS | |||
Function | Label | Function | Label |
RG-58A/U connector | CN1 | 15-pin flat connector | CN3 |
RJ-45 connector | CN2 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
Tx/Rx | Green | On | Data is being transmitted/received |
Tx/Rx | Green | Off | Data is not being transmitted/received |
LINK | Green | On | UTP link is good |
LINK | Green | Off | UTP link is broken |
Note: Exact locations of LEDs are unidentified. | |||
MISCELLANEOUS TECHNICAL NOTES |
Note: The ferrite bead should be clamped over the module cable as close as possible to 15-pin flat connector. |
My Books
