MACCON+ SEE Network Card Settings and Configuration

Card Type	Ethernet
Chip Set	Unidentified
Data Bus	PDS
Maximum Network Rate	10Mbps
Topology	Linear Bus
Wiring Type	AUI transceiver via DB-15 port (optional) RG-58A/U 50ohm coaxial
Boot ROM	Not available

CONNECTIONS
Function	Label	Function	Label
Daughterboard header	CN1A	RG-58A/U 50ohm coaxial	CN2
Header to main board or to AUI daughterboard	CN1B	Unshielded twisted pair	CN3
Header to daughterboard	CN1C	AUI transceiver via DB-15 port	CN4
Header to mainboard	CN1D
Note: The connector daughterboard connects to the main board via a cable.

CABLE TYPE
Setting	SW1
RG-58A/U 50ohm coaxial	On
AUI transceiver via DB-15 port	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	Blinking	Traffic detected on network
LED1	Yellow	Off	Traffic not detected on network
LED2	Green	On	Network connection is good
LED2	Green	Off	Network connection is broken
Note: Exact location of individual LEDs is unidentified.