MACCON3 IISI Network Card Settings and Configuration
ASANTE TECHNOLOGIES, INC.
MACCON3 IISI
Card Type | Ethernet |
Chip Set | Unidentified |
Data Bus | PDS |
NPU Options | 68882 |
Maximum Network Rate | 10Mbps |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 port (optional) RG-58A/U 50ohm coaxial |
Boot ROM | Not available |
CONNECTIONS | |||
Function | Label | Function | Label |
Daughterboard header | CN1A | PDS slot for additional card | CN2 |
Header to main board or to AUI daughterboard | CN1B | RG-58A/U 50ohm coaxial | CN3 |
Header to daughterboard | CN1C | Unshielded twisted pair | CN4 |
Header to mainboard | CN1D | AUI transceiver via DB-15 port | CN5 |
Note: The connector daughterboard connects to the main board via a cable. | |||
CABLE TYPE | |
Setting | JP1B |
Auto-detect | Open |
AUI transceiver via DB-15 port | Closed |
SLOT ADDRESS | ||
Setting | JP1A | JP2 |
9 | Closed | Closed |
A | Closed | Open |
B | Open | Closed |
E | Open | Open |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Yellow | Blinking | Traffic detected on network |
LED1 | Yellow | Off | Traffic not detected on network |
LED2 | Green | On | Network connection is good |
LED2 | Green | Off | Network connection is broken |
Note: Exact location of individual LEDs is unidentified. | |||
My Books
