ADVANCED 3270 ADAPTER (VER. 2) Network Card Settings and Configuration

Card Type	Network Interface Card
NIC Type	Ethernet
Network Transfer Rate	Unidentified
Topology	Linear Bus
Wiring Type	Shielded twisted pair RG-62A/U 93ohm coaxial
Boot ROM	Not available
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
RJ-11 connector	CN1	RG-62A/U 93ohm coaxial	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured – do not alter	SW1/1	Off
»	IRQ2 enabled	SW1/2	Off
	IRQ2 disabled	SW1/2	On
»	IBM interface enabled	SW1/3	Off
	IBM interface disabled	SW1/3	On
»	Communications disabled during power up	SW1/6	Off
	Communications enabled during power up	SW1/6	On
»	Memory enabled during power up at CE000 - CFFFF	SW1/7	Off
	Memory disabled during power up	SW1/7	On
»	IRMA interface enabled	SW1/8	Off
	IRMA interface disabled	SW1/8	On
	Polarity select straight through	SW3	On
	Polarity select reversed	SW3	Off

IRMA I/O ADDRESS SELECTION
Setting		SW1/9	SW1/10
»	220 – 227	Off	Off
	280 – 287	Off	On
	260 – 267	On	Off
	240 - 247	On	On

IBM I/O ADDRESS SELECTION
Setting		SW1/4	SW1/5
»	2D0 – 2DF	Off	Off
	6D0 – 6DF	Off	On
	AD0 – ADF	On	Off
	ED0 - EDF	On	On

CABLE TYPE SELECTION
Type	SW2
RG-62A/U 93ohm coaxial	Off
Shielded twisted pair	On