CONNEX 105-10T, LE1022C Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus
Wiring Type	Unshielded twisted pair AUI transceiver via DB-15 port
Boot ROM	Available

I/O BASE ADDRESS & BOOT ROM ADDRESS
I/O Address	Boot ROM Address	W1	W3
300h	C8000-C8FFFh	Closed	Closed
320h	CC000-CFFFFh	Closed	Open
340h	D0000-D3FFFh	Open	Closed
360h	D4000-D7FFFh	Open	Open

BOOT ROM
Setting		W2
»	Disabled	Open
	Enabled	Closed

WAIT STATE
Setting		W4
»	0 wait states	Open
	1 wait state	Closed

CABLE TYPE
Type		W6 - W11	W12
»	Unshielded twisted pair	Pins 2 & 3 Closed	Pins 2 & 3 Closed
	AUI transceiver via DB-15 port	Pins 1 & 2 Closed	Pins 1 & 2 Closed

DMA CHANNELS
Channel		W13	W14	W15	W16	W17	W18	W22	W23
»	DMA3	Open	Open	Open	Open	Open	Open	Closed	Closed
	DMA5	Open	Open	Open	Open	Closed	Closed	Open	Open
	DMA6	Open	Open	Closed	Closed	Open	Open	Open	Open
	DMA7	Closed	Closed	Open	Open	Open	Open	Open	Open

INTERRUPT REQUEST
IRQ		W19	W20	W21	W24
	Disabled	Open	Open	Open	Open
	2/9	Open	Open	Open	Closed
»	3	Closed	Open	Open	Open
	4	Open	Closed	Open	Open
	5	Open	Open	Closed	Open