CTP100-T Network Card Settings and Configuration
CABLETRON SYSTEMS, INC.
CTP100-T
Device Type | Media Adapter |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Star |
Wiring Type | Unshielded twisted pair, RG-58A/U 50ohm coaxial cable |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
RJ-45 UTP connector | CN1 | RG-58A/U connector | CN3 |
Power Jack | CN2 | ||
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
RG-58A/U port terminated internally | SW1 | Off |
RG-58A/U port terminated externally | SW1 | On |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Green | On | Power is on |
PWR | Green | Off | Power is off |
XMT | Green | Blinking | Data is being transmitted |
XMT | Green | Off | Data is not being transmitted |
RCV | Yellow | Blinking | Data is being received |
RCV | Yellow | Off | Data is not being received |
CLN | Red | Blinking | Collision detected on network |
CLN | Red | Off | No collision detected on network |
LNK | Green | On | UTP link is good |
LNK | Green | Off | UTP link is broken |
LNK | Green | Blinking | Reversed polarity signal is being received on UTP link |
My Books
