ATMWORKS 351 ADAPTER UTP Network Card Settings and Configuration
DIGITAL EQUIPTMENT CORPORATION
ATMWORKS 351 ADAPTER UTP
Card Type | Network adapter card |
NIC Type | ATM |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 155Mbps |
Topology | Star |
Wiring Type | RJ-45 unshielded twisted pair |
Data Bus | 32-bit PCI |
CONNECTIONS | |
Function | Label |
RJ-45 unshielded twisted pair connector | CN1 |
DIAGNOSTIC LEDS | ||
LED 1 | LED 2 | Condition |
Off | Off | Power is not being received or ARM works driver is not loaded |
Green | Any status | ATM works driver is loaded. Module status OK |
Amber | Amber | Adapter is in reset mode |
Amber | Off | Diagnostics failed |
Green/Off | Green | Network connection is good |
Green/Off | Amber | Network connection is broken |
Note: LED 1 is the module status indicator. LED 2 is the network status indicator. LEDs are on when displaying a color. | ||
My Books
