HP 28641B Network Card Settings and Configuration
HEWLETT PACKARD COMPANY
HP 28641B
Card Type | Ethernet transceiver |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus |
Wire Type | RG-58A/U 50ohm coaxial |
Data Bus | AUI via DB-15 connector |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI via DB-15 connector | CN1 | RG-58A/U 50ohm coaxial cable connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | SQE signal enabled | SW1/1 | Off |
SQE signal disabled | SW1/1 | On | |
| » | Loopback test mode disabled | SW1/2 | Off |
Loopback test mode enabled | SW1/2 | On | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Unidentified | On | Power is on |
PWR | Unidentified | Off | Power is off |
My Books
