ETHERNIC/2000 FO Network Card Settings and Configuration

NIC Type	Ethernet
Network Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus, Star
Wiring Type	AUI transceiver via DB-15 port Fiber optic cable
Boot ROM	Available (location unidentified)

CONNECTIONS
Function	Label	Function	Label
Fiber optic cable port (Receive)	CN1	AUI transceiver via DB-15 port	CN3
Fiber optic cable port (Transmit)	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
	Fiber optic cable selected	CN4	Installed
	Fiber optic cable not selected	CN4	Not installed
	AUI transceiver via DB-15 port selected	CN5	Installed
	AUI transceiver via DB-15 port not selected	CN5	Not installed
»	Bus select Autosense	JP2/C	Closed
	Bus select forced 8-bit	JP2/C	Open

BASE I/O ADDRESS SELECTION
Address		JP3/A	JP3/B	JP3/C	JP3/D
	200h	Open	Open	Open	Open
	220h	Closed	Open	Open	Open
	240h	Open	Closed	Open	Open
	260h	Closed	Closed	Open	Open
»	300h	Open	Open	Closed	Open
	320h	Closed	Open	Closed	Open
	340h	Open	Closed	Closed	Open
	360h	Closed	Closed	Closed	Open

INTERRUPT SELECTION
IRQ		JP1/A	JP1/B	JP1/C	JP1/D	JP1/E	JP1/F	JP1/G	JP1/H
»	3	Closed	Open	Open	Open	Open	Open	Open	Open
	4	Open	Closed	Open	Open	Open	Open	Open	Open
	5	Open	Open	Closed	Open	Open	Open	Open	Open
	9	Open	Open	Open	Closed	Open	Open	Open	Open
	10	Open	Open	Open	Open	Closed	Open	Open	Open
	11	Open	Open	Open	Open	Open	Closed	Open	Open
	12	Open	Open	Open	Open	Open	Open	Closed	Open
	15	Open	Open	Open	Open	Open	Open	Open	Closed

BUS TIMING CONFIGURATION
Setting		JP2/A	JP2/B
»	Normal	Closed	Open
	Alternate	Open	Closed

DIAGNOSTIC LED(S)
LED	Status	Condition
LED1	On	Network connection is good
LED1	Off	Network connection is broken