ETHERNET 1000A/V2.3 Network Card Settings and Configuration

Card Type	Network Interface Card
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Available
Network Transfer Rate	10Mbps
Topology	Linear Bus, Star
Wiring Type	Unshielded twisted pair (RJ-45) AUI, RG-58A/U 50ohm coaxial
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
RJ-45 connector	J3	External LED connector	JP2
BNC connector	J4	AUI connector	P1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Boot ROM disabled	JP5	Open
	Boot ROM enabled	JP5	Closed

BASE I/O ADDRESS SELECTION
Setting		JP1/A	JP1/B	JP1/C
»	300h	Closed	Closed	Closed
	320h	Closed	Closed	Open
	340h	Closed	Open	Closed
	360h	Closed	Open	Open

INTERRUPT SELECTION
IRQ		JP1/D	JP1/E	JP1/F	JP1/G	JP1/H	JP1/I
	2	Closed	Open	Open	Open	Open	Open
»	3	Open	Closed	Open	Open	Open	Open
	4	Open	Open	Closed	Open	Open	Open
	5	Open	Open	Open	Closed	Open	Open
	6	Open	Open	Open	Open	Closed	Open
	7	Open	Open	Open	Open	Open	Closed

DMA CHANNEL SELECTION
Channel	JP1/J	JP1/K	JP1/L	JP1/M
1	Closed	Open	Closed	Open
3	Open	Closed	Open	Closed

CABLE TYPE SELECTION
Type	JP4	JP11
AUI	Pins 2 & 3 closed	Pins 1 & 2 closed
BNC	Pins 1 & 2 closed	Pins 2 & 3 closed
Unshielded twisted pair	Unidentified	Unidentified

ROM ADDRESS SELECTION
Address		JP3/A	JP3/B	JP3/C	JP3/D
	C000h	Closed	Closed	Closed	Closed
	C400h	Open	Closed	Closed	Closed
»	C800h	Closed	Open	Closed	Closed
	CC00h	Open	Open	Closed	Closed
	D000h	Closed	Closed	Open	Closed
	D400h	Open	Closed	Open	Closed
	D800h	Closed	Open	Open	Closed
	DC00h	Open	Open	Open	Closed