DK100-DE2 Tape drive card Settings and Configuration
KINGSTON TECHNOLOGY CORPORATION
DK100-DE2
Device Type | Internal Tape Drive |
Interface | SCSI |
Format | DAT, DDS |
Sustained Transfer Rate | 183 KBPS |
Size | 5.25 in. Half-height |
View | Top |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | Factory configured - do not alter | J7 | Unidentified |
» | Termination enabled | W2 | Pins 1 & 2 closed |
| Termination disabled | W2 | Pins 2 & 3 closed |
» | Factory configured - do not alter | J6 | Unidentified |
DRIVE SELECT ID |
Note: SCSI ID is selected by either rotating the Unit Select Rotating Switch inside the Receiving Frame, or installing a connector at J4 and setting the ID through a remote location. |
TERMINATION POWER SELECTION | ||
Setting | W1 | |
» | TERMPWR supplied by drive to SCSI interface | Closed |
| TERMPWR supplied by SCSI interface to drive | Open |
MANUFACTURERS RECOMMENDED MEDIA | |
Tape | Capacity |
90-meter DDS | 2GB |
My Books
