TDC 3520/PANTHER MINI 2000 I, TDC3720/PANTHER MINI 4600 I Tape drive card Settings and Configuration
TANDBERG DATA
TDC 3520/PANTHER MINI 2000 I, TDC3720/PANTHER MINI 4600 I
Device Type | Tape Drive |
Interface | SCSI-2 |
Format | QIC-WIDE, Quarter Inch |
Sustained Transfer Rate | 300KBPS |
Size | 3.5 in. half height |
View | Top |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Termination enabled | JP1/Pins 1 & 2 | Closed |
Termination disabled | JP1/Pins 1 & 2 | Open | |
| » | Factory configured – do not alter. (Parity enable/disable) | JP1/Pins 11 & 12 | Unidentified |
| » | Factory configured – do not alter. | JP1/Pins 13 & 14 | Unidentified |
| » | Factory configured – do not alter. | JP1/Pins 15 & 16 | Unidentified |
| » | Factory configured – do not alter. | JP1/Pins 17 & 18 | Unidentified |
| » | Factory configured – do not alter. | JP1/Pins 19 & 20 | Unidentified |
DRIVE SELECT ID | ||||
Drive ID | JP1/Pins 5 & 6 | JP1/Pins 7 & 8 | JP1/Pins 9 & 10 | |
0 | Open | Open | Open | |
1 | Closed | Open | Open | |
| » | 2 | Open | Closed | Open |
3 | Closed | Closed | Open | |
4 | Open | Open | Closed | |
5 | Closed | Open | Closed | |
6 | Open | Closed | Closed | |
7 | Closed | Closed | Closed | |
TERMINATION POWER SELECTION | ||
Setting | JP1/Pins 3 & 4 | |
| » | TERMPWR supplied by drive | Closed |
TERMPWR supplied by SCSI interface to drive | Open | |
MANUFACTURERS RECOMMENED MEDIA | |||
Drive | Tape | Capacity Without Compression | Capacity With Compression |
TDC 3520/PANTHER MINI 2000 I | QIC-3040-MC: MC3000XL | 840MB | N/A |
TDC 3520/PANTHER MINI 2000 I | QIC-3040-MC: QW3000XL | 1.0GB | N/A |
TDC 3720/PANTHER MINI 4600 I | QIC-3040-MC: MC3000XL | 840MB | N/A |
TDC 3720/PANTHER MINI 4600 I | QIC-3040-MC: QW3000XL | 1.0GB | N/A |
TDC 3720/PANTHER MINI 4600 I | QIC-3210-MC: QWX3210XL | 2.3GB | 4.6GB |
DIAGNOSTIC LED(S) |
Note: Exact location and function of LEDs is unidentified. |
My Books
