WANGDAT 5130SE, WANGDAT 2000SE, WANGDAT 3200SE Tape drive card Settings and Configuration
TECMAR
WANGDAT 5130SE, WANGDAT 2000SE, WANGDAT 3200SE
Device Type | External Tape Drive |
Interface | SCSI |
Format | DDS DDS-DC (3200SE) |
Sustained Transfer Rate | Unidentified (5130SE) 500KBPS (2000SE) 732KBPS (3200SE) |
Size | Unidentified |
View | Top |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Buffered Mode software selectable | SW3/1 | Off |
| Buffered Mode not software selectable | SW3/1 | On | |
| » | Compression enabled | SW3/2 | On |
Compression disabled | SW3/2 | Off | |
| » | SCSI 1 mode enabled | SW3/3 | Off |
SCSI 2 mode enable | SW3/3 | On | |
| » | Allow insertion and removal of Tapes by command or eject button | SW3/4 | Off |
Prevent insertion and removal of Tapes by command or eject button | SW3/4 | On | |
| » | Parity check enabled | SW3/5 | On |
Parity check disabled | SW3/5 | Off | |
| » | Factory configured - do not alter | SW3/6 | Off |
| » | Factory configured - do not alter | SW3/7 | Off |
| » | Factory configured - do not alter | SW3/8 | Off |
DRIVE SELECT ID | ||
Drive ID | SW2 | |
0 | Arrow at 0 | |
| » | 1 | Arrow at 1 |
2 | Arrow at 2 | |
3 | Arrow at 3 | |
4 | Arrow at 4 | |
5 | Arrow at 5 | |
6 | Arrow at 6 | |
7 | Arrow at 7 | |
Note: Settings 8 & 9 are not used. | ||
TERMINATION POWER SELECTION | ||
Setting | JP1 | |
| » | TERMPWR supplied by drive | Closed |
TERMPWR supplied by SCSI interface to drive | Open | |
Note: Jumper JP1 is located inside the drive. Exact location is unidentified. | ||
MANUFACTURERS RECOMMENDED MEDIA | ||
Drive | Tape | Capacity |
WangDAT 5131SE | WangDAT 60 meter | 1.3 GB |
WangDAT 5131SE | WangDAT 90 meter | 2.0 GB |
WangDAT 5131SE | Maxell HS-4/60 | 1.3 GB |
WangDAT 5131SE | Maxell HS-4/90 | 2.0 GB |
WangDAT 5131SE | TDK DC4-60 | 1.3 GB |
WangDAT 5131SE | TDK DC4-90 | 2.0 GB |
WangDAT 5131SE | Fuji DG-90 | 2.0 GB |
WangDAT 5131SE | JVC DF-90 | 2.0 GB |
WangDAT 5131SE | KAO KD200 | 1.3 GB |
WangDAT 2000SE | WangDAT 60 meter | 3.7 GB |
WangDAT 2000SE | WangDAT 90 meter | 5.7 GB |
WangDAT 2000SE | Maxell HS-4/60 | 3.7 GB |
WangDAT 2000SE | Maxell HS-4/90 | 5.7 GB |
WangDAT 2000SE | TDK DC4-60 | 3.7 GB |
WangDAT 2000SE | TDK DC4-90 | 5.7 GB |
WangDAT 2000SE | Fuji DG-90 | 5.7 GB |
WangDAT 2000SE | JVC DF-90 | 5.7 GB |
WangDAT 2000SE | KAO KD200 | 3.7 GB |
WangDAT 3200SE | WangDAT 60 meter | 2.6 GB |
WangDAT 3200SE | WangDAT 90 meter | 4.0 GB |
WangDAT 3200SE | Maxell HS-4/60 | 2.6 GB |
WangDAT 3200SE | Maxell HS-4/90 | 4.0 GB |
WangDAT 3200SE | TDK DC4-60 | 2.6 GB |
WangDAT 3200SE | TDK DC4-90 | 4.0 GB |
WangDAT 3200SE | Fuji DG-90 | 4.0 GB |
WangDAT 3200SE | JVC DF-90 | 4.0 GB |
WangDAT 3200SE | KAO KD200 | 2.6 GB |
DIAGNOSTIC LED(S) (MODEL 5130SE ONLY) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Drive active |
LED1 | Green | Off | Drive not active |
LED2 | Amber | On | Tape loaded |
LED2 | Amber | Blinking | Tape loading/unloading |
LED2 | Amber | Off | Tape not loaded |
DIAGNOSTIC LED(S) (MODELS 3200SE, AND 2000SE ONLY) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Drive active |
LED1 | Red | Blinking | Drive fault |
LED1 | N/A | Off | Drive not active |
LED2 | Amber | On | DDS tape loaded |
LED2 | Green | On | Compress tape loaded |
LED2 | Amber | Blinking | Tape loading/unloading |
LED2 | N/A | Off | Tape not loaded |
Note: On models 3200SE, and 2000SE LED1 is a multicolor Green/Red indicator, and LED2 is a multicolor Amber/Green indicator. | |||
My Books
