WANGDAT 3100SE, WANGDAT 3400SE Tape drive card Settings and Configuration
TECMAR
WANGDAT 3100SE, WANGDAT 3400SE
Device Type | Internal Tape Drive |
Interface | SCSI |
Format | DDS DDS-2 (WANGDAT 3400SE) |
Sustained Transfer Rate | Unidentified |
Size | Exact external dimensions unidentified |
View | Top |
DRIVE SELECT ID |
Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window. |
MANUFACTURERS RECOMMENDED MEDIA | |||
Drive | Tape | Capacity Without Compression | Capacity With Compression |
3100SE | 60 meter DDS | 1.3 GB | N/A |
3100SE | 90 meter DDS | 2.0 GB | N/A |
3400SE | 60 meter DDS | 1.3 GB | 2.6 GB |
3400SE | 90 meter DDS | 2.0 GB | 4.0 GB |
3400SE | 120 meter DDS | 4.0 GB | 8.0 GB |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Drive activity on SCSI bus |
LED1 | Unidentified | Off | No drive activity on SCSI bus |
LED1 | Unidentified | Blinking | Drive moving tape |
LED2 | Unidentified | On | Tape cartridge in drive |
LED2 | Unidentified | Off | No tape cartridge in drive |
LED2 | Unidentified | Blinking | Tape cartridge loading or unloading |
LED3 | Unidentified | On | Cleaning required |
LED3 | Unidentified | Off | Drive O.K. - no cleaning required |
MISCELLANEOUS TECHNICAL NOTES |
For detailed information about internal jumper settings of the drive, refer to Tecmar models 3100DX, and 3400DX. |
My Books
