G/ETHERNET 32EB ADAPTER Network Card Settings and Configuration
GATEWAY COMMUNICATIONS, INC.
G/ETHERNET 32EB ADAPTER
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 32-bit EISA |
Topology | Star Linear Bus |
Wiring Type | Shielded/Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM | Available |
COMPATIBILITY MODE | ||
Setting | JP1 | |
| » | Compatibility off | Pins 2 & 3 Closed |
Compatibility on | Pins 1 & 2 Closed | |
Note: Turn off compatibility.If one of the following problems persist after checking all other possibilities;
| ||
SYSTEM SPEED | ||
Setting | JP2 | |
| » | System speed 50MHz or faster | Pins 1 & 2 Closed |
System speed slower then 50MHz | Pins 2 & 3 Closed | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
1 | Yellow | On | Data is being transmitted |
1 | Green | On | Data is being received |
2 | Red | On | Adapter is continually sending random data |
2 | Green | On | Network is connection good |
MISCELLANEOUS NOTES |
Different drivers must be used for the National & the Fujitsu chipset cards & are not interchangeable. Fujitsu drivers may be used for either 8 or 16 bit Fujitsu cards. While the National chipset cards require a different driver for an 8 or 16 bit card. |
My Books
